Abstract Fruit juices are on the rise, due to the search new mixes, flavors and nutritional value. This research investigated the acceptance and sensory profile of mixed juices. Sixteen (16) mixed juices with caja, umbu, cocoa and mango flavors were studied, using acceptance and check-all-that-apply (CATA) tests in different cities (n = 226). Juices A1 and D1 had the highest scores in Porto Alegre-RS, Brazil (respectively, 7.15 and 6.91). Differently from Salvador-BA, Brazil, where the highest scores were D2 (6.76) and D3 (6.71). Using CATA, it was shown that customers in the Southern Region characterized samples differently from customers in the Northeastern Region, and the correspondence analysis, showed that consumers in Porto Alegre-RS presented different attributes than those in Salvador-BA, with respect to mixed juices and their acceptance. It is suggested the validity of the consumer data in the characterization of the sensory parameters of the mixed juices and that the familiarity with the fruit flavors interfered in the acceptance of the same.

Abstract The objective of this study was to develop bionanocomposites from blends of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and from 3% and 6% bentonite clay. Initially, the bentonite clay was treated with Praepagen salt, and the properties of the modified clay were evaluated. After the organophilization of the clay was completed, 50:50 blends of PLA/PBAT were prepared, and 3 and 6% clay was added. To test the dispersion of the system, the blending sequence was performed using eight different sequences for the addition of clay to the PLA/PBAT matrices. The mixtures were prepared in a twin screw extruder, and the specimens were subsequently injection molded. The investigated mechanical and morphological properties included the yield strength, yield strain, tensile and bending elastic modulus, and scanning and transmission electron microscopy analyses. The results of this study showed increases of the mechanical properties when nanoparticles were added and the formation of bionanocomposites with intercalated structures.

RESUMO: O Brasil apresenta a maior população de caprinos do continente americano, com mais de nove milhões de cabeças, a caprinocultura é considerada uma atividade em ascensão e de grande importância para a economia, principalmente da região nordeste. No presente trabalho foram determinados o teor de lipídios totais e o perfil de ácidos graxos de amostras de filé e pernil de caprinos juvenil, registrados em órgãos de inspeção do Ministério da Agricultura e comercializados na cidade de Salvador (Bahia). O percentual médio de lipídios totais no filé foi de 1,68±0,04 e no pernil de 4,02±0,09, com diferenças significativas entre os cortes (p<0,05). Foram identificados nos cortes, vinte e sete ácidos graxos, sendo os majoritários os ácidospalmítico (C16:0), esteárico (C18:0) e oleico (C18:1ω9) presentes em 21,32%, 20,39%, 34,49% no filé, e 21,74%, 21,94%, 33,38% no pernil, respectivamente. Os somatórios totais de ácidos graxos saturados e poli-insaturados variaram de 42,75 a 45,23% e de 14,04 a 12,35%, entre os cortes de filé e de pernil, respectivamente. A razão entre AGPI/AGS foi de 0,35 para o filé e de 0,15 para o pernil, e a razão ω6/ω3 foi de 3,07 para o filé e de 2,27 para o pernil. Constatou-se que existe uma diferença significativa no teor de lipídios totais e da composição de ácidos graxos em cortes comerciais de filé e pernil de carne caprina.

ABSTRACT: Brazil has the largest herd of goats of the American continent, with more than 9 million head. Goat farming is considered a growing and important activity for the economy, mainly in the northeastern region of Brazil .In this research, were determined the lipid content and the composition of fillet and shank fatty acids of young goats, registered in the inspection sector of the Ministry of Agriculture and marketed in the city of Salvador (Bahia). The average percentage of total lipids in the fillet was 1.68±0.04 and in the shank of 4.02±0.09, this is a significant difference between the cuts (P<0.05). Twenty-seven (27) fatty acids were identified in the cuts, most are palmitic acid (C16:0), stearic acid (C18:0) and oleic acid (C18:1ω9) present in 21.32%, 20.39%, 34.49% in the fillet and 21.74%, 21.94%, 33.38% in the shank, respectively. The total sums of saturated and polyunsaturated fatty acids ranged of 42.75 to 45.23% and 14.04 to 12.35% between fillet and shank cuts, respectively. The ratio of PUFA/SFA was 0.35 for fillet and 0.15 for shank, and the ratio ω6/ω3 was 3.07 for fillet and 2.27 for shank. Therefore, is a significant difference in total lipid content and fatty acid composition in commercial cuts of beef fillet and shank.

Abstract Different polymeric matrices have been investigated for use in the development of biodegradable films. The incorporation of cellulose nanocrystals in such films has particularly attracted attention because of the potential for achieving improved properties of starch nanocomposites. In the present study, cellulose nanocrystals were extracted from coconut fibers and incorporated in cassava and potato starch films at different concentrations. The properties of the different nanobiocomposite films were comparatively evaluated, including their barrier and mechanical properties. All the films, regardless of the nanocrystal concentration, were found to exhibit low solubility in water, with increased moisture content particularly observed in the films with higher nanocrystal concentrations. The potato starch film with the lowest nanocrystal concentration was found to exhibit the best mechanical properties. The observations of this study indicated that the source of the starch and the nanocrystal concentration determined the properties of the nanobiocomposite films.

O trabalho teve como objetivo desenvolver e caracterizar embalagens ativas flexíveis formuladas pela incorporação de polpas de frutas tropicais a uma matriz polimérica de amido de mandioca plastificada com glicerol, avaliando as propriedades mecânicas, de barreira e a eficácia antioxidante destas embalagens durante o armazenamento. As embalagens foram produzidas por casting, com concentrações fixas de amido de mandioca (4,5%) e glicerol (1,0%), e concentrações de polpa de manga, acerola e seriguela entre 5 e 20%. Foram caracterizadas as propriedades de barreira (espessura, umidade, sólidos totais, atividade de água e solubilidade) e propriedades mecânicas dos filmes. A ação antioxidante dos aditivos incorporados foi avaliada através do armazenamento do azeite de dendê embalado com os filmes contendo os aditivos naturais, monitorando a sua oxidação por 40 dias, sob condições de oxidação acelerada (63%UR/30°C). A adição das polpas de frutas aos filmes promoveu um aumento da resistência mecânica. Os filmes com as polpas incorporadas desempenharam efeito antioxidante sobre o azeite de dendê durante os 40 dias de armazenamento, podendo ser aplicados para o controle da oxidação deste produto.

This research aimed to develop and characterize flexible active packages formulated by the incorporation of pulps from tropical fruits to a polymeric matrix of manioc starch, plasticized with glycerol. The mechanical properties, the barriers and the antioxidant efficacy of these packages were evaluated during storing. The packages were produced by casting, with fixed concentrations of manioc starch (4.5%) and glycerol (1.0%), and variable concentrations of mango, acerola and seriguela pulps between 5 and 20%. The barrier properties (width, humidity, total solids, water activity and solubility) and the mechanical properties of the films were evaluated. The antioxidant action of the additives incorporated was evaluated through the storage of palm oil packed with the films containing the natural additives. Its oxidation was monitored for 40 days, under conditions of accelerated oxidation (63%UR/30ºC). The addition of fruit pulps to the films promoted an increase of the mechanical resistance. The films with the added pulps performed an antioxidant effect on the palm oil during the 40 days storage, which could be applied for the oxidation control of this product.

O objetivo do trabalho foi desenvolver e caracterizar uma embalagem biodegradável, utilizando como matriz polimérica a quitosana, plastificada com glicerol, bem como avaliar o efeito da adição de um aditivo antioxidante natural (urucum) nas embalagens na proteção antioxidante. As embalagens foram preparadas por casting contendo 1,5% de quitosana, 0,15% de glicerol e 0,25 a 1,0% de urucum. O azeite de dendê embalado com os filmes contendo o aditivo foi monitorado aos 0, 7, 15, 30 e 45 dias de armazenamento sob condições de oxidação acelerada (63%UR/30°C). O azeite de dendê embalado no filme que continha o maior percentual de urucum (1,0%) foi o que menos oxidou ao longo do período estudado. Constatou-se que, à medida que aumentam as perdas de Fenóis Totais nas formulações dos filmes, ocorre uma redução nos aumentos do Índice de Peróxidos do produto embalado, demonstrando assim que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação.

The objective was to develop and characterize a biodegradable packaging using chitosan as polymeric matrix, plasticized with glycerol, as well as evaluate the effect of adding a natural antioxidant additives (annatto) in antioxidant protection in packaging. The cans were prepared by casting containing 1.5% of chitosan, 0.15% glycerol and 0.25 to 1.0% of coloring. Palm oil packed with the films containing the additive was monitored at 0, 7, 15, 30 and 45 days of storage under accelerated oxidation conditions (63% UR/30°C). Palm oil packed in the film that contained the highest percentage of annatto (1.0%) was the least oxidized during the study period. It was found that, as they increase the losses of phenolic compounds in the formulations of the films, there is a reduction in the peroxide increases the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation.

O objetivo do trabalho foi desenvolver uma embalagem biodegradável utilizando como matriz polimérica o amido de mandioca plastificada com glicerol e reforçada com a incorporação de nanocelulose da fibra de coco, bem como, avaliar o efeito da adição de um aditivo natural (erva-mate) nas formulações de nanobiocompósitos com ação antioxidante. Os nanocristais de celulose (L/D=39) foram obtidos por hidrólise ácida com H2SO4 a 65%. Os filmes foram preparados por casting contendo 4,5 e 6,0% de amido, 0,5 e 1,5% de glicerol, 0,3% de nanocelulose e 20% de extrato de erva-mate. O armazenamento do azeite de dendê embalado com os filmes contendo o aditivo foi monitorado por 40 dias sob condições de oxidação acelerada (63%UR/30°C). Constatou-se que, à medida que aumentam as perdas de Polifenóis Totais nos filmes, ocorre um menor aumento do Índice de Peróxidos do produto embalado, demonstrando, assim, que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação. A incorporação de extrato de erva-mate não alterou as propriedades mecânicas e de barreira desses filmes.

The objective was to develop biodegradable packaging using a polymer matrix as the cassava starch plasticized with glycerol and reinforced with the incorporation of nanocelulose of coconut fiber, as well as to evaluate the effect of the addition of an additive nature (yerba mate) in nanobiocompósitos formulations with antioxidant action. The nanocrystal cellulose (L/D=39) were obtained by acid hydrolysis with 65% H2SO4. The films were prepared by casting containing 4.5 and 6.0% starch, 0.5 and 1.5% glycerol, 0.3% nanocelulose and 20% extract of yerba mate. The palm oil storage packed with films containing the additive was monitored for 40 days under conditions of accelerated oxidation (63%UR/30°C). It was found that as the losses increase polyphenol films, there is a smaller increase of the peroxide value of the packaged product, thus demonstrating that instead of the product, the compounds of the package's who are suffering oxidation. The incorporation of yerba mate extract did not alter the mechanical and barrier properties of these films.

Goma xantana é um heteroexopolissacarídeo sintetizado por Xanthomonas utilizando glicose ou sacarose como fontes de carbono, além de outros micronutrientes. É de grande aplicação industrial, devido às suas propriedades reológicas. O caldo de cana é rico em nutrientes, podendo ser utilizado como substrato para obtenção de xantana, viabilizando a produção no País pela redução dos custos. O objetivo deste estudo foi testar a produção da xantana obtida com diferentes cepas nativas de Xanthomonas em meio de cultivo composto de caldo de cana (XCC) e compará-la com os valores obtidos com a sacarose (XS). Foram preparados meios com o mínimo dos requerimentos nutricionais, contendo sacarose ou caldo de cana, suplementados apenas com uréia (0,01%) e fosfato (0,1%), fermentados em shaker (28 °C, 250 rpm, 120 horas). A maior produção de xantana foi obtida com a Xanthomonas campestris manihotis e caldo de cana (33,54 g.L-1), valor aproximadamente dez vezes maior que o obtido com a sacarose (3,45 g.L-1). A viscosidade aparente a 25 s-1, 2,0% de goma e 25 °C foi de 99,36 mPa.s para XCC e de 500,43 mPa.s para XS. A biossíntese da xantana a partir do caldo de cana merece peculiar atenção, constituindo-se numa possibilidade promissora para sua produção em larga escala.

The xanthan gum is a heteroexopolysaccharide synthesized by Xanthomonas campestris in a culture medium using glucose or sucrose as carbon sources and other nutrients. Due to its rheological properties, it has been contributing for the range of applications in the food industry, pharmaceutical, and tertiary recovery of oil. Sugarcane is rich in nutrients (sugars and minerals) and can be used as a substratum for the xanthan production, which can be produced in Brazil due to its cost reduction. The objective of this study was to test the production of the xantana obtained with different culture native of Xanthomonas in medium composed of sugarcane broth (XSC) and to compare with the values obtained with sucrose (XS). Two medium cultures were used with the minimum of the nutrients, contained sucrose or sugar cane complemented with urea (0.01%) and K2HPO4 (0.1%), fermented in shaker (28 °C, 250 rpm, 120 hours). The best production was obtained using Xanthomonas campetris manihotis and sugarcane (33.54 g.L-1), approximately ten times bigger then obtained with the sucrose (3.45 g.L-1). The apparent viscosity for an aqueous solution of 2.0% of gum to 25 °C and 25 s-1 was 99.36 mPa.s for XSC and 500.43 mPa.s to XS. The biosynthesis of xanthan starting from sugarcane deserves peculiar attention, constituting like this, a promising possibility for gum production in wide climbs.